Openwork scarves. How to crochet a scarf for beginners: the easiest way, the Vivienne model, an openwork model for women, an option for men and for children - patterns are attached, a pattern for crocheting a children's scarf Two-color crochet scarf
A scarf is the simplest accessory and at the same time quite functional, it can be used as a headdress, covering the head, as a cape or stole. There are many ways to crochet or knit a scarf to make the work beautiful, bright, and original. A scarf not only warms, but is also an important detail of an outfit; it can liven up a boring, monochromatic coat or down jacket; voluminous women's models serve as a fluffy collar, which adds femininity and elegance.
Crocheting or knitting a scarf is not difficult even for beginner needlewomen; working on a simple model, be it a men's scarf or women's versions, does not require skills in knitting an openwork pattern. However, if you plan to knit an original accessory, you can always use ready-made patterns with detailed descriptions.
How to crochet a scarf: an easy pattern for beginners
An easy-to-make scarf model, which is a long rectangular fabric, can be knitted by any needlewoman who has already mastered the principle of crocheting or knitting stitches and knitting stitches. For this work, half-woolen or woolen yarn of medium thickness is used and a hook is half a size thicker than indicated on the yarn label, since it is necessary to knit loosely, not tightly. If you are doing knitting work, it is also recommended to purchase a tool half a size larger. Knitting such a product for beginners is very simple:
- To work, we make a chain of an arbitrary number of links. You don’t have to count the loops; the length of the chain is equal to the length of the work (approximately 120 cm). If you plan to knit a snood, the chain can be connected, but it is important to straighten the chain first so that it does not twist;
- Then we make a lift with one loop and then one post at a time in all links of the chain. used yarn over;
- We form 1 ch. and turn the work around. We perform this row, inserting the instrument not under two arches, but only behind the back arch, 1 st in each. b/n;
- We change the side of the work again and knit a row similar to the previous one. Due to the fact that the hook is inserted into the back bow, the knitting is embossed.
Women's winter scarves with a simple relief pattern can also be created with knitting needles. To work, the number of loops must correspond to the width of the scarf; the product is knitted with a 1x1 elastic band. When knitting, you can choose the length of the work during the process; if you decide to crochet a scarf, the length is determined from the very beginning.
The pattern is very simple, so if you want to get an original work, you can use skeins of melange yarn, knit in two threads, contrasting in color, or make the scarf striped. Using the method described above, you can create a snood. This pattern is also applicable for a hat.
How to crochet a scarf with an openwork pattern: a few more options
If you decide to create an openwork version of a scarf or hat with crochet or knitting, it is not necessary to study diagrams with a detailed description of complex patterns or create intricate motifs. A scarf with a simple openwork pattern looks no worse, and you can knit it without using a visual pattern with a detailed description, just remembering the sequence of elements in the pattern.
I scheme (openwork pattern)
The length of the initial chain corresponds to the width of the work, while the number of links for the openwork pattern should be divided by 8 plus one additional edge. For beginners, you can pre-knit a small sample of an openwork pattern:
- For an openwork pattern, we form a chain of 25 loops (8*3+1) from the selected yarn. To create the initial chain, it is recommended to take a hook half a size larger so that the edge of the work is not pulled together;
- We collect 4 additional ones, in the 7th from the instrument we form 1 tbsp. s/n. Next 1 vp, 1 tbsp. s/n, through one base, again 1 vp. and 1 tbsp. s/n through one link;
- 5 ch, change the side of the openwork pattern, skipping one top stitch, 1 st. b/n, then 3 v.p. 3 tbsp. s/n in the same top, knit 1 tbsp. b/n through one vertex. 5 ch, skipping the top to the next one - 1 st. b/n, 3 v.p., 3 tbsp. s/n., drop another one, in the next one - 1 tbsp. b/n, etc. Join in the 2nd stitch from the 1st stitch of the previous row;
- Again we make 5 ch, turn the knitting over, connect to the top of the third column with one stitch. b/n. 3 v.p. and in each link of the chain of 3 v.p. We knit the previous row one st. s/n and connect with one st. b/n for a chain of 5 v.p. We repeat this sequence until the row of openwork pattern is completed;
- We form all further rows by analogy in the manner described in the previous diagram;
- We complete the work in the following way: make 5 ch, adjoining the top of the third column with one st. b/n, 3 vp, under a chain of 5 vp, 3 vp, adjacent to the arms of the third column, etc. The rapport of the openwork pattern is ready.
Let's look at other patterns for crocheting a scarf and creating an openwork pattern for beginners.
II scheme (openwork shell pattern)
- For this openwork pattern we form a chain of 29 centuries. p. In the seventh from the hook we knit 1 tbsp. b/n, 4 vp, in the 4th initial chain we make 1 tbsp. b/n and repeat until completion;
- Then we make a loop, in the first arch 1 tbsp. b/n, in the 2nd - 7 tbsp. s/n. and in all odd arches 1 tbsp. b/n, in even numbers 7 tbsp. s/n;
- At the end of the line we make 4 ch, change the side of the work, and knit 1 st at the top of the second column of the previous one. s/n, 1 vp, a similar combination in the next 3 vertices, in the sixth - 1 st. s/n, connect to the second top of the next arch with one st. s/n and further duplicate;
- Again we make 4 vp, 1 tbsp. b/n in the first arch, 3 vp, 1 tbsp. b/n in the second, 3 v.p. etc;
- At this point the rapport is completed; to move on to the second rapport we knit 4 ch, 1 tbsp. b/n in the 2nd arch, 4 vp, leave one arch, after one 1 tbsp. b/n. At the end we knit 2 ch. and connect them into the final arch. Next, we duplicate the combinations described above according to the scheme.
III scheme (openwork mesh)
- The repeat of the openwork pattern is 10 loops, so the total number of chain links for the width of the scarf should be a multiple of 10. Having cast on the first row of the openwork scarf, make 1 ch, and 1 st in the second. b/n, 3 ch, in the fifth we make 1 tbsp. s/n, 2 v.p. and in the same loop 1 tbsp. s/n, 3 v.p. 1 tbsp. b/n, repeat until the row is completed;
- At the end of the line 5 ch, work on the other side, form 5 sts into an arch. s/n. Next 5 ch. and 1 tbsp. b/n. Duplicate until the row of openwork pattern is completed;
- We knit 4 ch, turn the work over, 1 tbsp. s/n, 2 vp, one st. b/n in the tops, dial 7 ch. and connect with the next bright one, also knitting 1 tbsp at each vertex. b/n. We complete the row with two v.p. and 1 tbsp. s/n;
- Next we make 4 ch, change the direction of work, 1 tbsp. s/n, 3 ch, at the 2nd, 3rd and 4th tops of the columns we knit 1 tbsp. b/n., 3 v.p., 1 tbsp. s/n in the 4th loop of a chain of seven, 2 vp, 1 tbsp. s/n in the same loop, 3 ch. (we repeat the second row of the pattern pattern), we knit 1 stitch at the 2nd, 3rd and 4th tops of the columns. b/n. At the end 3 vp, 1 tbsp. s/n, 2 vp, 1 tbsp. s/n;
- We turn the knitting over, knit 3 tbsp into the first arch. s/n, 5 vp, 1 st in the central top. b/n, 5 vp, in the next arch 5 tbsp. s/n. This row is knitted by analogy with the third, then we repeat the repeat of the openwork pattern.
Women's winter scarf models can also be knitted using an openwork pattern made from wool yarn. It is recommended to knit the work wider so that it can be folded in half.
Similar patterns with descriptions are suitable not only for knitting a scarf or stole; openwork patterns for beginners can be used to create tops or cardigans, a summer hat from cotton yarn.
Unusual ways to knit scarves
If you want to knit a modern, original accessory, you can use not only openwork patterns, but also a non-standard crochet technique from individual elements, which, like puzzles, are assembled into a single fabric. It is recommended to knit from yarn of different colors to make the work bright. Let's consider this option:
- To work, we form a chain (the number of links should be divided by 5 and add 7 to it). For a sample to understand the principle of knitting, you can cast on 37 loops;
- In the 4th from the hook, 5th, 6th and 7th loops we knit 1 tbsp. s/n., 5 ch, in the 6th and the next four we knit 1 tbsp. s/n, i.e. alternate 5 stitches and 5 vp. by skipping the same number of rings of the original chain, you should get a ribbon with holes;
- Next, we collect the same chain from yarn of a different color. We pass it through the holes in the first ribbon and begin to knit in exactly the same way as the previous one, having knitted the stitches, we cast on 5 chain stitches, while the original chain is behind the first ribbon, and the one just cast on in front is connected into the sixth loop with a st /n. We connect five air loops behind the first ribbon. The number of ribbons is comparable to the required width of the product and the choice of yarn.
- We cast on a chain of 40 chain stitches for the snood if you are knitting from very thick yarn with crochet number 10 or 80 if the yarn is of medium thickness. We connect the chain into a circle;
- We decorate the initial row with half-columns s/n. We make a connection and lift to the next one, then we knit a fluffy element (make a yarn over, insert a hook and thread the working thread, repeat two more times and knit all seven loops at once). Then we secure the element with one loop. In the same one we knit another similar element, then skipping 2 loops, in the 3rd again 2 lush stitches and so on until the end of the row;
- We connect the row under the arch between the first two cones, without tightening the thread so that the connection is invisible. Next, we knit two cones into each arch between the two of the previous row to make spikelets;
- Having knitted the snood to the required width, we finish the work, by analogy with how we started it.
Similar projects for beginners can be created with knitting needles using Chinese spikelet knitting patterns. In this case, we knit the product lengthwise with knitting needles on a fishing line. The pattern can also be used for a voluminous hat; we reduce it by the number of loops in the fluffy elements.
How to crochet a men's scarf?
A warm men's scarf can be made in the simplest way for beginners, which was described at the very beginning. Only for a men's scarf it is recommended to choose strict, brutal colors, for example, gray, blue, wine or burgundy. Models of a men's scarf with stripes look good, for example, a combination of yarn in light gray and asphalt colors. You can also choose melange yarn with a transition of several colors.
While women's models are usually long and are often worn over coats, draping outerwear, men's scarves are short in length and width and are worn inside.The standard width of a men's scarf is approximately 16-18 cm, length - 90-110 cm. As a rule, openwork patterns with holes that resemble women's models are not used for a men's scarf.
Experienced craftswomen offer original ideas for beginners on how to crochet a men's scarf, relief designs for creating a men's scarf, reminiscent of tweed or drape woolen fabric due to the presence of ribs. This model looks great and is suitable for a man's wardrobe. This option is suitable for beginners, since its scheme is very simple:
- For work, we collect a chain of 90-110 cm (corresponds to the length of the product). We make 3 lifting stitches, in the 5th from the hook and all subsequent ones we knit 1 treble;
- Next, alternate knits and purls. embossed stitches, initially we make 3 ch, yarn over, place the hook behind the stitch of the previous row in front for the front one and in the back for the purl one;
- Turning the work over, follow the pattern: purl. and persons elements. The number of rows can be increased by another 1-3;
- After the strip of relief elements, we knit with regular stitches, inserting the hook not into the tops of the previous row, but into the arms in front of the braid. Having turned the knitting over, we knit the same row again, inserting the hook into the arms under the main braid, consisting of the vertices of the previous row;
- We knit 3 more rows by analogy with the previous one, which is described above. The repeat of the openwork, relief pattern is completed, you can knit a couple more of these strips and complete the work with rows of front and back stitches. You can also change the number of rows of each strip depending on the thickness of the yarn.
A men's scarf with a relief pattern can also be knitted. For a men's scarf knitted, a pattern with diagonal stripes or rectangles in a checkerboard pattern is ideal. A similar pattern can also be used to knit a men's hat. The pattern is suitable for beginners, the diagram is as follows:
- To knit a men's scarf with knitting needles, the number of loops for the width of the product should be a multiple of four plus two edge stitches;
- The initial loop is removed and then the faces are alternated. and out. 4x4, at the end we knit one purl. Further along the terrain;
- In the 3rd row we make an offset to create diagonal stripes. Remove the first edge, purl the second, then knit 4, purl 4. and so we alternate until the row is completed. In the fifth we remove the first one, 2 p., 4 knits., 4 p. etc. In the seventh: purl 3, knit 4, purl 4, in the ninth: alternating purl 4, knit 4. We knit the entire product using this principle. At the end we close the loops with knitting needles in the traditional way or with a crochet hook.
Knitting a scarf for beginners is not difficult; it is the simplest product, the basis for knitting needlework.
The length of the scarf can be adjusted while knitting, so if you run out of yarn, you don’t have to buy another one.In addition, when knitting, you can make a pattern with transverse stripes from yarn of different colors.
How to crochet a scarf for a boy and a girl
For a child, it is recommended to knit a set consisting of a hat and a scarf, decorating the products with decorative elements: for a boy, the faces of favorite animals knitted from yarn can be used, for a girl - flowers, which are also easy to create for beginners.Let's look at how to knit a set of a hat and scarf with flowers and leaves:
- For the scarf, we form a chain approximately 10 cm long, knitting 1 tbsp into the fifth link from the hook. s/n, omitting 2, in the 3rd we form 1 tbsp. b/n, omit 2, 1 tbsp. s/n, 3 vp, 1 tbsp. s/n and so on until completion;
- We turn the work, 4 ch, into the same 1 st. s/n. We knit 1 tbsp in all arches. b/n, and in the top 1 tbsp. s/n, 3 vp, 1 tbsp. s/n. Using a similar pattern, we knit to the selected length. You can use other patterns for crocheting and knitting a scarf described above for a children's product. The scarf can also be knitted. For beginners, creating a satin scarf using medium weight yarn without an openwork pattern using knitting needles may be an easier option;
- The edge of a children's scarf can be decorated with decorative elements, for example, arches made of yarn in an alternative color. The edges of the scarf are decorated with flowers and leaves, and a fringe of yarn. It is very easy to knit a flower: we form a circle of 5 stitches, then three ch, and then three more, knit 3 tbsp. s/n, then alternate 3 vp, 3 tbsp. s/n. In total we form 5 arches. We tie the arches with 1 tbsp. b/n, 1 half-st. double crochet, 5 tbsp. s/n, 1 half-st. s/n, 1 tbsp. b/n. On the Internet you will find other flower knitting patterns with descriptions;
- We start knitting a hat from wool blend yarn from the top of the head. We make a sliding loop and knit 16 stitches into it. s/n. We tighten the working thread. We form a circle for the top of the hat, first knit 2 tbsp. s/n, i.e. we make increases, in the next row we make increases through one, in the 3rd - through two, then a row with increases through three, etc. There should be a total of 6 rows (for a hat for a child under 2 years old) or 7 (for a hat for a child from 3 to 5 years old), it is recommended to make increments in increments so as not to end up with a polygon instead of a circle. We knit the next rows without increments, forming the main part of the hat.
If you want to crochet a boy's scarf, you don't have to choose dark colors like you would for a man's scarf. An openwork pattern is also allowed. You can use the following scheme for creating an original set of a scarf and a “Lion Cub” hat:
- We knit the middle part of the scarf from yellow/orange yarn. We form a chain of 10 vp, in the sixth and four more we knit 1 st. s/n. Turn the work over, 5 vp, 5 tbsp. s/n;
- Next, take a beige/light brown working thread. We tie the middle part of the work according to the same pattern, connecting the strips using the side rings;
- We make lion faces as decoration for the work. We knit a circle from yellow/orange yarn (the same way as we knitted the top of the hat), the size of the circle should be smaller than the width of the scarf. We tie a fringe around the muzzle. We take 2 threads of beige/light brown color, approximately 10 cm long, fold them in half, insert the fold with a hook into the hole in the edging of the circle, draw the ends of the threads through the resulting loop, and tighten. For the eyes you can use appliqués or beads; the nose, mustache and mouth can be made from yarn;
- To knit a hat, you can use the previous pattern to complete the work or knit the product with knitting needles. The front of the hat can be decorated with the face of a lion, and a pompom can also be attached to the top of the work.
With the approach of cold weather, knitting warm clothes becomes relevant. Large crochet stitches are great for this. This article contains information about yarn for such products, patterns for bulk knitting and a master class on knitting a warm snood scarf.
Selecting the material
Products knitted with thick yarn are warm, cozy and look very stylish. In the cold season, things made from such yarn are simply irreplaceable.
Knitted tape is perfect for knitting threads. Its variety is represented by a wide range. It consists of knitted stripes. You can make such a ribbon yourself, for example, from old T-shirts. You just need to cut the T-shirt into strips and stretch them so that they take the shape of a tube. Old things will get a new life and save money on buying new products.
These knitted strips are used to knit not only beautiful snoods, bags, slippers, but also bedspreads, furniture covers and rugs. This material will be very suitable for home decor. Products made from knitted stripes are not only beautiful, but also very durable and wear-resistant. This is ideal for rugs. They will turn out not only warm and beautiful, but will also last a long time.
Wool and wool blend roving produces very thick and warm yarn. The price, of course, is high for such threads, but products made from it are simply chic and warm. They seem to be made of airy marshmallows. A minimum size 15 hook is suitable for knitting.
Bulk products are also made from cord yarn. An excellent option for warm winter clothes. You can purchase ready-made cords, or you can knit them yourself. And if you make the cord airy, the products will be even more voluminous. When knitting products from laces, their thickness increases several times compared to knitting with just thick threads.
In any weather from September to April, a circular scarf is indispensable. This accessory is called a snood, or scarf-collar. Many girls have already appreciated its charm and numerous advantages. The main advantage of the snood is that it allows you to wrap your neck securely and tightly. Also, when thrown over the head, it can easily replace a warm hat, without causing such unpleasant consequences as a crumpled hairstyle and a mark from the edge of the headdress on the forehead.
Types of Circular Scarves
Given the wide range of consumers, it is not surprising that there are several types of circular scarves. They are classified based on the knitting method used. You can have a pattern that includes only single crochets (SC) and single or double crochet stitches (DC, SS2N). This product is considered dense.
The presence of air loops (AP) in the pattern turns the snood into an openwork product. It is worth clarifying that an ornament with through holes does not mean at all that the scarf will no longer be warm. All its warming qualities will be preserved if warm yarn with fluff is used. For example, if you are knitting (the pattern of which includes a very large number of chains of VP and large holes), it will be warm if knitted from angora or mohair. Natural fiber in the thread must be at least 50%.
In addition to the knitting density, snoods are distinguished by size:
- Long (two or more turns around the neck).
- Short scarf (one turn).
Both are very comfortable, but the long one looks more voluminous.
Features of making warm snoods
Only a real winter scarf (crocheted) can completely protect you from the piercing wind and snow. The pattern, working tool and yarn directly affect the quality and appearance of the product.
To get a scarf like the one in the photo below, you need to purchase a very thick thread and a large hook.
Approximate yarn thickness range: 50-100 m/100 grams. The size of the hook should be selected individually to the yarn selected for making the product. However, experienced knitters recommend using a tool one size larger than needed for a particular yarn. Thus, the crochet pattern (pattern and pattern does not matter) will become softer.
Patterns that can be used for knitting warm snoods
You should not choose too complex a pattern to crochet a thick scarf. The diagram and description of elementary patterns are perfect for working with thick thread. For example, you can use the simplest RLS or SSN. For variety, they can be tied not by both upper “braids”, but only by one of them. The resulting canvas will have raised horizontal stripes. You can also use other simple patterns.
If the thread selected for the job has a thickness of 200-400 m/100 grams, then the choice of suitable patterns expands significantly. Here you can already apply patterns with a large number of DCs, with “bushes” or lush columns.
When knitting openwork scarves, you can choose any pattern at your discretion.
Short snood
This accessory is designed to be wrapped around the neck once. In order to (the scheme can be any) so that it turns out voluminous, it should be made high. As a rule, the shape of such a product when folded approaches a square (height equals width). The optimal size is considered to be 35 x 35 cm. But if the knitter plans to wear a scarf on her head, she should make it taller (about 50 cm).
You can knit a short snood in both directions: lengthwise or crosswise. You just need to take into account the distribution of the pattern stripes. Scarves with longitudinal stripes look more attractive. If you look at the gray scarf proposed below in the photo, then its knitting begins with a long VP chain.
Next, the work process includes knitting a flat fabric alternating several patterns. For decoration, this model is equipped with fasteners, but most often the edges of the fabric are sewn or initially knitted in the round. In the latter case, no seam is formed, which is very convenient for a product such as a scarf.
Specifics of a long snood
When knitting an accessory intended to be wrapped twice around the neck, you also need to prepare a sample pattern. A long crocheted scarf-collar (the pattern can be dense or openwork) is woven in almost the same way as a short one.
Having chosen the direction of knitting, type on the VP and begin making the fabric. Dimensions that allow you to use a long snood as efficiently as possible:
- Width - 30-40 cm.
- The length of the product when folded is 45-70 cm.
There is no point in exceeding the specified length, since in this case you can crochet a scarf that is too large and uncomfortable. The diagram and description of many patterns are given in accordance with their repeats. For circular products this is of particular importance. It is necessary to ensure that the canvas consists of entire repeats. The “cut” halves look very sloppy.
A scarf is a fashion accessory and a piece of clothing that protects us from the cold. There are a huge number of knitting options for this product. Let's look at the simplest of them. So, how to crochet a scarf for beginners.
Crocheted spiral scarf
A lush and openwork scarf is very simple to make. Beginners can easily handle it. The advantage of this model is that you can fantasize with a ruffle pattern. The product consists of two parts - a narrow ribbon and a lush border that looks like a spiral. The ribbon pattern is unchanged, but how to design the ruffles is up to you.
What we need to knit a spiral scarf:
- 250g yarn “Children's whim”;
- hook No. 4
Description
Cast on 15 VP + 3 stitches. rise. Then: 2 VP, skip 2 VP, 1 RLS. We continue knitting until the end of the row. Knit all subsequent rows in the same way, knitting sc above sc to form a mesh.
We unfold the future scarf into a spiral and begin knitting the border. We perform it with a thread in 2 additions.
First, we tie the edge of the ribbon with a sc (in each “cell” there should be 3 sc), and in the second row you need to tie a sc, increasing the number of loops by 2 times. In the next row we again double the number of loops, and in the last row we make an increase only 1.5 times (for this, we knit three from two loops of the previous row). The spiral scarf is ready
To make it more magnificent, we knit a spiral on the other side. To make the product look more impressive, the color of the thread can be changed.
This is what a spiral scarf looks like, knitted from yarn containing 60% merino wool. Knitting was done with a thread in 2 additions.
Crochet scarf “scales” for beginners: video master class
Beautiful scarf for a boy, crocheted. Diagram and description
How to knit a scarf for a boy so that the child wears it with pleasure, and even beginners can cope with the work? Easily. The scarf with the favorite hero of millions “Minion” consists mainly of double crochets.
To knit a scarf for a boy you need to prepare:
- 100g bright blue acrylic yarn;
- remnants of yellow, brown, white, black and gray yarn;
- hook No. 2.5
Size of the finished scarf for a boy: 20*100 cm
Description
Using blue yarn we cast on a chain of 40 VPs and knit 15 rows of dc. Next, change the color to yellow and perform 7 more rows. Then, make 2 rows in black and return to yellow. After 6 rows, we attach the blue thread again and knit to the required length.
Pattern “knitted scarf for a boy”
When the product reaches the desired length, we proceed to assembly and finishing. We tie the edges of the scarf with 1 row of sc. We perform the second row by threading the hook under the first row of the binding. This will allow the canvas to be smooth and not curl.
Let's make eyes. We collect 4 VP and close the chain into a ring. We make 8 sc in the ring, after which we knit 2 circles in brown, 4 in white and 3 in gray, not forgetting to increase stitches (16 in each row).
We sew on the eyes as shown in the photo, and embroider the mouth with black thread.
Warm crochet scarf for beginners: video MK
Crocheted circular women's scarf for beginners. Description and diagram
Models of scarves that are closed in a ring are called snoods or collars. They wrap them around the neck or cover the head. Patterns can be very diverse - openwork, elastic, diamonds, etc. Let's look at how to knit a simple warm collar.
For work we prepare:
- 400g of yarn, which contains 15% wool and 75% acrylic;
- hook No. 7
To determine the length of the product, you need to measure the distance from the chin to the crown, and then multiply it by the number of turns around the neck.
400g of yarn is enough for a snood 166 cm long.
Description
We start knitting with a set of VP. The length of the chain should be 166 cm. We close the chain into a ring and make patterns, as shown in the diagram.
We knit 4 stitches. stitch, then insert the hook into the second loop. Knit the next 4 stitches. in a column, pick up the working thread and pull it through the 2 formed loops. Insert the hook into the next loop and repeat the work again - knit together 2 stitches of 4 loops.
We continue knitting until the end of the row, after which we begin to make patterns again. When the yarn runs out, we complete the work.
Scheme on how to crochet a warm scarf
Simple orange scarf: video tutorial
https://youtu.be/UJqOG2pb2Hs
How to knit an openwork scarf using the ribbon lace technique
The scarf of this model can only be worn in summer. Ribbon lace patterns will perfectly complement any romantic look. A detailed description and diagram will help even beginning craftswomen cope with the task.
For work we will need:
- 50g of beige wool blend yarn “Olga”;
- hook No. 2.
Description
We collect a chain of 12 VPs, close it into a ring and knit patterns to the desired length, as the diagram shows.
Please note. In the first round motif, 2 rows are knitted in the round, and the petals are worked sequentially. The diagram is missing a lot of air. loops, so choose an area with the maximum content of them and focus on it. Better yet, print out the diagram and fill in the missing details.
Scheme of how to knit an openwork scarf
Thus, using a crochet hook you can knit both warm scarves and openwork ones. And most importantly, a novice needlewoman can handle each of them. Fast loops and even rows.
For beginners, an openwork crochet scarf: video MK
Surprisingly, this digest included more than 15 openwork scarves. Which means that such scarves are popular.
Ribbon lace scarf. Width 26cm, length 178cm. Crocheted No. 2 from Narcissus threads. First we knit the openwork ribbons. Then, during the knitting process, the openwork ribbons were tied to each other with a chain of air loops and columns without
Read more
Scarf with a twist. Yes, yes, the highlight depends only on you and your imagination. A diagram from an oriental magazine (either China or Japan). Knitted from VITA "BRILLIANT" yarn. Composition: 45% wool (laster), 55% acrylic.
Read more
The green openwork scarf is crocheted No. 3 from Pekhorka Crossbred Brazil yarn (500m/100g). Scarf pattern: 1st row - cast on the required number of loops (I have 78). 2nd row - 2 dc; through three loops into the fourth loop we knit a “fan” - 3 dc, 2 ch, 3 dc;
Read more
Hello, dear friends. Contacted another set of beret + openwork scarf. I am sharing with you a description of the beret and a pattern of the scarf. The brooch was also made by me. Take the description Viscose yarn from Magic, hook number 3. On OG 56. Cast on a chain
Read more
I knitted an openwork scarf from cotton threads, it took about 50 grams. The diagram is from Asian magazines, I found it on the Internet. Knits up quite quickly. I urgently needed a yellow scarf - I contacted him in a couple of evenings. Scarf knitting pattern: B
Read more
A set for girls and women, consisting of a hat and an openwork scarf “The Snow Queen” is crocheted from “White Leopard” yarn with a very beautiful three-dimensional “popcorn” pattern using crochet no. 3.5. The scarf is knitted with an openwork fan pattern. The kit is very
Read more
Greetings to all crochet lovers! I found a knitting pattern for an openwork scarf on the Internet that I really liked. The scheme is simple. I was immediately inspired to knit such a scarf. The product took 100 grams. thread Composition: mohair 10%, the rest acrylic. Hook No. 3.
Read more
This is how the children's openwork scarf turned out. Crocheted with double crochet, crochet number 2.5. Schemes of leaves and flowers are attached. I fiddled a little with the brushes... But now I know how to do them correctly. Scarf knitting pattern: main pattern: 1 row - columns
Read more
To knit an openwork scarf, I used Baby Wool yarn: composition: 40% Wool - 20% Bamboo - 40% Acrylic, Weight 1 skein 50 grams. Thread length: 175 m. Hook: 3.0. Scarf length 160cm, width 21cm. Knitting pattern
Read more
Openwork scarf made of ribbon lace. Yarnart jeans threads (50g/160m) - 55% cotton, 45% polyacrylic, very soft yarn. It took 3 skeins of each color. The top tape in the photo was involved in the work, although the bottom one is very
Read more
The openwork scarf is crocheted No. 3, 5 from thin mohair. Size - 1m 50 cm. Scarf knitting pattern:
Read more
The openwork scarf “Osenina” can be knitted from the threads you like: mohair, wool, wool mixture, baby yarn, choosing a hook of the right size. The beginning of knitting is a chain of five air loops. Then we knit 18 repeat stitches and repeat them as needed
Read more
Elena's work. The openwork scarf is made with crochet No. 2 from wool mixture using the “ribbon lace” technique (knitting pattern is attached) and looks elegant and intricate. It can be draped in various ways, using decorative pins or removable brooches.
Read more
The scarf took 1 skein of thread. Crocheted No. 2. I knitted the “pineapple” pattern for my beloved sister for March 8th. I knit only for my children and sisters.
Read more
Good day to all needlewomen! My name is Tatyana. I am from Veliky Novgorod. My next work is an openwork scarf. I used ALIZE REAL 40 thread, hook number 3. Knitted from three skeins. Tatiana's scarf consists of approximately 22
Read more
Hello! Another openwork scarf is ready for the cold weather. Knitted from ALIZE REAL 40 yarn, hook No. 3, openwork diamond pattern. Scarf knitting pattern:
Read more
Hello, my name is Daria. I live in St. Petersburg. I know how to knit and crochet, but I love crocheting. I knitted this scarf as a gift for a friend. The scarf-collar is crocheted No. 2 (you can take 4, I just
Read more
